Publications & Presentations

Publications:

These publications may be accessed online by resolving the corresponding DOI names at http://dx.doi.org

2014

“Bone tissue engineering and regenerative medicine: Targeting pathological fractures", DT Nguyen, KJL Burg, Journal of Biomedical Materials Research Part A,2014.

"Endovascular Seldinger Needle Placement: A Simulator for Examining Haptic Skills", RB Singapogu, CM Kerr, JF Eidt, JF Pagano, CC Burg, TC Smith, KJL Burg, Medicine Meets Virtual Reality 21, 2014.

2013

“Toxic effects of resazurin on cell cultures", RT Pace, KJL Burg, Cytotechnology, 2013.

“Overcoming hypoxia to improve tissue‐engineering approaches to regenerative medicine”, E Bland, D Dréau, KJL Burg, Journal of Tissue Engineering and Regenerative Medicine, 2013. 

“Designing a tunable 3D heterocellular breast cancer tissue test system”, CC Yang, KJL Burg, Journal of Tissue Engineering and Regenerative Medicine, 2013.

“Tannic acid preferentially targets estrogen receptor-positive breast cancer”, BW Booth, BD Inskeep, H Shah, JP Park, EJ Hay, KJL Burg, International Journal of Breast Cancer, 2013.

“Evaluation of normal and metastic mammary cells grown in different biomaterial matrices: establishing potential tissue test systems” BW Booth, JP Park, KJL Burg, Journal of Biomaterials Science, Polymer Edition, 24 (6), 758-768, 2013.

“Increased extracellular matrix density decreases MCF10A breast cell acinus formation in 3D culture conditions”, A Lance, CC Yang, M Swamydas, D Dean, S Deitch, KJL Burg, D Dreau, Journal of Tissue Engineering and Regenerative Medicine, 2013.

2012

“Overcoming hypnoxia to improve tissue-engineering approaches to regenerative medicine”, E Bland, D Dreau, KJL Burg, Journal of Tissue Engineering and Regenerative Medicine, 7 (7), 505-514, 2013. 
DOI: 10.1002/term.540

“Characterizing the effects of cell settling on bioprinter output”, M Pepper, V Seshadri, TC Burg, KJL Burg, R Groff, Biofabrication, 4, (1) ,2012. DOI:10.1088/1758-5082/4/1/011001

“A Quantitative Metric for Pattern Fidelity of Bioprinted Cocultures”, M Pepper, R Groff, C Cass, J Mattimore, TC Burg, KJL Burg, 36 (6) E151-E162, 2012. DOI: 10.1111/j.1525-1594.2012.01460.x

“Effect of mesh construction on the physicomechanical properties of biocomponent knit mesh using yarns derived from degradable copolyesters”, SJ Peniston, KJL Burg, SW Shalaby, Journal of Biomedical Materials Research Part B: Applied Biomaterials, 100 (7), 1922-1934, 2012.

“Standardization versus creativity: a complementary tension”, KJL Burg, Journal of Histotechnology, 35 (2), 57, 2012.

“Synergistic effects of conditioned media and hydrostatic pressure on the differentiation of mesenchymal stem cells”, S Maxson, KJL Burg, Cellular and Molecular Bioengineering, 5 (4), 414-426, 2012.

“A novel method for the production and evaluation of hernia repair mesh in an in vitro environment”, B Mersereau, RE Groff, TC Burg, KJL Burg, Tissue Engineering and Regenerative Medicine, 9 (3), 116-127, 2012.

“A Haptic Simulator to Increase Laparoscopic Force Application Sensitivity”, LO Long, RB Singapogu, A Giovannina, D Smith, TC Burg, CC Pagano, KJL Burg, Studies in health technology and informatics, 184, 273-275, 2012.

“Polymers for Vascular and Urinogenital Applications”, SW Shalaby, KJL Burg, eds. CRC Press, 2012.

“Three-dimensional ex vivo system”, KJL Burg, CC Yang, U.S. Patent No. 8,293,531, Washington DC, US Patent and Trademark Office, October 23, 2012.

“Objective differentiation of force-based laparoscopic skills using a novel haptic simulator”, RB Singapogu, DE Smith, LO Long, TC Burg, CC Pagano, KJL Burg, Journal of Surgical Education, 2012.

“Salient haptic skills trainer: initial validation of a novel simulator for training force-based laparoscopic surgical skills,” RB Singapogu, S DuBose, LO Long, DE Smith, TC Burg, CC Pagano, KJL Burg, Surgical Endoscopy, 1-9, 2012.

“Assessing surgeon and novice force skill on a haptic stiffness simulator for laparoscopic surgery”, RB Singapogu, DE Smith, BM Altenhoff, LO Long, VV Prabhu, CC Pagano, TC Burg, KJL Burg, Student Health Technology Information, 173, 469-474, 2012.

2011

“Tannic Acid Cross-linked Collagen Scaffolds and Their Anti-cancer Potential in a Tissue Engineered Breast Implant”, CA Cass, KJL Burg, Journal of Biomaterials Science, Polymer Edition, in press.

“Effect of Osteoclast Co-culture on the Differentiation of Human Mesenchymal Stem Cells Grown on Bone Graft Granules”, K Sinclair, S Sinclair, KJL Burg, Journal of Biomaterials Science, Polymer Edition, 22(4-6), 289-808,2011.
DOI: 10.1163/092050610x496260 

“Preparation and Characterization of a Composite of Demineralized Bone Matrix Fragments and Polylactide Beads for Bone Tissue Engineering”, C Thomas, S Maxson, KJL Burg, Journal of Biomaterials Science. Polymers Edition, 22(4-6), 589-610, 2011.
DOI: 10.1163/092050610x488232

“Bioreactors for Tissue Engineering”, S Maxson, D Orr, KJL Burg, Tissue Engineering, 179, 2011.
DOI: 10.1007/978-3-642-02824-3_10

2010

“Building off-the-shelf tissue-engineered composites”, T. Burg, CA Cass, RE Groff, M Pepper, KJL Burg, Philosophical transactions of the Royal Society of London. Series A; Mathematical, physical, and engineering sciences, 368, 1917, 1839, 2010.
DOI: 10.1098/rsta.2010.0002

The Normal Microenvironment Directs Mammary Gland Development”, E McCave, CA Cass, KJL Burg, B Booth, Journal of Mammary Gland Biology and Neoplasia, 15, 3, 291-299, 2010.
DOI: 10.1007/s10911-010-9190-0

“Conditioned Media Enhance Osteogenic Differentiation on Poly(L-lactide-co-ε-caprolactone)/Hydroxyapatite Scaffolds and Chondrogenic Differentiation in Alginate”, S Maxson, KJL Burg, 21, 11, 1441-1458, 2010.
DOI: 10.1163/092050609x12518804794703

“Evaluation of the lipid-rich layer of reamer aspirate”, S Sinclair, K Jeray, S Tanner, KJL Burg, Tissue Engineering and Regenerative Medicine, 4, 491-495, 2010.
DOI: 10.1002/term.266 

“Post-bioprinting processing methods to improve cell viability and pattern fidelity in heterogeneous tissue test systems”, Engineering in Medicine and Biology Society, 2010 Conference of the IEEE, 259-262, 2010.
DOI: 10.1109/IEMBS.2010.5627467

2009

“EDTA enhances high-throughput two-dimensional bioprinting by inhibiting salt scaling and cell aggregation at the nozzle surface”, CA Parzel, ME Pepper, T Burg, RE Groff, KJL Burg, Journal of Tissue Engineering and Regenerative Medicine, Tissue Engineering & Regenerative Medicine, 3, 260-268, 2009.
DOI: 10.1002/term.162

“In vitro Interaction between Mouse Breast Cancer Cells and Mouse Mesenchymal Stem Cells During Adipocyte Differentiation”, F Xu, C Gomillion, S Maxson, KJL Burg, Tissue Engineering & Regenerative Medicine, 3, 338-347, 2009.
DOI: 10.1002/term.158

“Characterization of the Differentiation and Leptin Secretion Profile of Adult Stem Cells on Patterned Polylactide Films”, A Chaubey, M Leadbetter, K Ross, C Gomillion, KJL Burg, Journal of Biomaterials Science.  Polymer Edition, 20 (7-8),1163-1177,2009.
DOI: 10.1163/156856209x444484

“Effect of Ceramide on Mesenchymal Stem Cell Adipocyte Differentiation”, F Xu, C-C Yang, C Gomillion, KJL Burg, Applied Biochemistry and Biotechnology, 160 (1), 197-212, 2009.
DOI: 10.1007/s12010-008-8505-8

"Role of Cytoskeletal Components in Stress-Relaxation Behavior of Adherent Vascular Smooth Muscle Cells", J Hemmer, J Nagatomi, D Dean, S Wood, A Vertegel, M LaBerge, Journal of Engineering in Medicine, 131, 041001, 1-7, 2009.
DOI: 10.1115/1.3049860 

2008

“Effects of Serum Deprivation on the Mechanical Properties of Adherent Smooth Muscle Cells”, JD Hemmer, D Dean, A Vertegel, E Langan, L LaBerge, Proc. IME H: Journal of Engineering in Medicine, in press.

"Optimizing the Functionalization Process for Nanopillar Enhanced Electrodes with GOx/PPY for Glucose Detection", R Gangadharan, V Anandan, G Zhang, Nanotechnology, 19, 395501, 1-7, 2008.
DOI: 10.1088/0957-4484/19/39/395501

“Electrochemical fabrication and evaluation of highly sensitive nanorod-modified electrodes for a biotin/avidin system”, SJ Lee, V Anandan, G Zhang, Biosensors and Bioelectronics, 23, 1117-1124, 2008.
DOI: 10.1016/j.bios.2007.10.025

“Conditioned Media Causes Increases in Select Osteogenic and Adipogenic Differentiation Markers in Mesenchymal Stem Cell Cultures", S Maxson, KJL Burg, Tissue Engineering and Regenerative Medicine, 2(2-3):147-154, 2008.
DOI: 10.1002/term.76

“Design of a Modular Bioreactor to Incorporate Both Perfusion Flow and Hydrostatic Compression for Tissue Engineering Applications”, DE Orr, KJL Burg, Annals of Biomedical Engineering, 36(7):1228-1241, 2008.
DOI: 10.1007/s10439-008-9505-0

"Development of a low dose antiresorptive drug regimen reveals synergistic suppression of bone formation when coupled with disuse", SAJ Lloyd, ND Travis, T Lu, TA Bateman, Journal of Applied Physiology, [Epub Jan 30, PMID: 18174391]; 2008.
DOI: 10.1152/japplphysiol.00632.2007

"Laser-Guidance Based Detection of Cells with Single-Gene Modification", Z Ma, Y Wei, KJL Burg, X-C Yuan, P Xiang, BZ Gao, Applied Physics Letters, 92, 2139021-3, 2008.
DOI: 10.1063/1.2938020

2007

“An Expanding View of Aminoglycoside-Nucleic Acid Recognition”, B Willis, DP Arya, Advances in Carbohydrate Chemistry & Biochemistry. vol 60, Chapter 6, 263-314, 2007.
DOI: 10.1016/S0065-2318(06)60006-1

"Skeletal deterioration induced by RANKL infusion: a disease model for high-turnover bone disease", YY Yuan, PJ Kostenuik, S Morony, S Adamu, DT Simionescu, DM Basalyga, TA Bateman, Osteoporosis Int., [Epub Nov 24, PMID: 18038244]; 2007.
DOI: 10.1007/s00198-007-0509-7

"The Use of Medical Imaging and Rapid Prototyping Technologies in Prosthetic Auricular Fabrication", R Emert, BK Davis, S Pehlivan, et. al. Journal of Prosthodontics; 2007.
DOI: 

“Nanoscale Shear Deformation Mechanisms of Opposing Cartilage Aggrecan Macromolecules”, L Han, D Dean, P Mao, C Ortiz, AJ Grodzinsky, Biophysical Journal 93: L23-25L, 2007.
DOI:10.1529/biophysj.107.114025

 “Towards an in vivo biologically-inspired nanofactory”, PR LeDuc, MS Wong, PM Ferreira, RE Groff, K Haslinger, MP Koonce, WY Lee, JC Love, JA McCammon, NA Monteiro-Riviere, VM Rotello, GW Rubloff, R Westervelt and M Yoda, Nature Nanotechnology, 2, 3-7, 2007.
DOI: 10.1038/nnano.2006.180

“Towards friction and adhesion from high modulus microfiber arrays”, B Schubert, C Majidi, RE Groff, S Baek, B Bush, R Maboudian, RS Fearing, Journal of Adhesion Science and Technology, v. 21, no 12-13.  pp. 1297-1315, 2007.
DOI: 10.1163/156856107782328344

“Grafting Amine-terminated Branched Architectures from Polylactide Film Surfaces for Improved Cell Proliferation”, AV Janorkar, EW Fritz, KJL Burg, AT Metters, DE Hirt, Journal of Biomedical Materials Research: Part B - Applied Biomaterials, 81: 142-152, 2007.
DOI: 10.1002/jbm.b.30647

"Electroimpregnation of yarns and fabrics with nonwetting liquids", KG Kornev, H Burstyn, Y Kamath, Journal of Applied Physics, 101, 114901, 2007.
DOI: 10.1063/1.2740333

"Impregnation of liquids into a laminated porous material with a high permeability contrast", MM Alimov, KG Kornev, Physics of Fluids, 19, 102108, 2007.
DOI: 10.1063/1.2778623

“Role of Reaction Kinetics and Mass Transport in Glucose Sensing with nanopillar array electrodes”, V Anandan, X Yang, E Kim, YL Rao, G Zhang, Journal of Biological Engineering, 2007.
DOI: 10.1186/1754-1611-1-5

“Simulating the Structure and Effect of the Electrical Double Layer at Nanometer Electrodes”, X Yang, G Zhang, Nanotechnology, 18, 335201, 1-9, 2007.
DOI: 10.1088/0957-4484/18/33/335201

2006

“Major Groove Recognition of DNA by Carbohydrates”, B Willis, DP Arya, Current Organic Chemistry, Carbohydrates in Drug Design, 2006, 10, 663-673.
DOI: 10.2174/138527206776359739

PRESENTATIONS:

“Systems Engineering Challenges in Biofabrication”, T Burg, R Groff, K Burg, T Boland, Proceedings of the IEEE Southeast Conference, Richmond, Virginia, pp. 395-398, March 2007.

“Design of a Tissue Engineering System to Influence and Quantify Oxygen Gradients”, E Bland, KJL Burg, Transactions of the 2008 Fall Symposium of the Society for Biomaterials, Atlanta, GA, 2008.

“Tamoxifen Loaded Polylactide Beads for Breast Tissue Engineering Following Lumpectomy”, F Xu, KJL Burg, Transactions of the 2008 Fall Symposium of the Society for Biomaterials, Atlanta, GA, 2008.

“Analysis of Bone Marrow Aspirate as an Osteoinductive Bone Graft Material”, S Kay, KJ Jeray, SL Tanner, KJL Burg, Transactions of the 2008 Fall Symposium of the Society for Biomaterials, Atlanta, GA, 2008.

“High Resolution Inkjet Printing as a Tool for Creating Tissue Test Systems”, CA Parzel, T Burg, R Groff, AM Hill, M Pepper, B Stripe, KJL Burg, Transactions of the 2008 Fall Symposium of the Society for Biomaterials, Atlanta, GA, 2008.

“The Modified Inkjet Cell Printer as a Tool for 3-Dimensional Breast Tissue Modeling”, CA Parzel, AM Hill, B Stripe, KJL Burg, Fifth DoD Era of Hope Meeting, Baltimore, MD, 2008.

“Cancer-Stromal Cell Interactions”, CC Yang, KJL Burg, Fifth DoD Era of Hope Meeting, Baltimore, MD, 2008.

“Controlled Differentiation of Adipose Cells: Toward Reconstruction of Breast Tissue”, C Gomillion, KJL Burg, Fifth DoD Era of Hope Meeting, Baltimore, MD, 2008.

“Osteogenic Potential of Cells Isolated from Lipid-Rich Layer of Reamer Aspirate”, SS Kay, KJ Jeray, SL Tanner, JL Burg, Transactions of the 2009 Annual Meeting and Exposition of the Society for Biomaterials, San Antonio, TX, 2009.

“Evaluation of Factors that Influence Adipogenic Cell Differentiation”, CT Gomillion, KJL Burg, Transactions of the 2009 Annual Meeting and Exposition of the Society for Biomaterials, San Antonio, TX, 2009.

“Channeled Fiber Bundles for Tissue Engineering Application”, HJ Lee, KJL Burg, Transactions of the 2009 Annual Meeting and Exposition of the Society for Biomaterials, San Antonio, TX, 2009.

“High Resolution Cell Patterning and Co-Culture Using a Custom BioPrinter”, CA Parzel, ME Pepper, T Burg, RE Groff, KJL Burg, Transactions of the 2009 Annual Meeting and Exposition of the Society for Biomaterials, San Antonio, TX, 2009.

“Polymeric Composite Tissue Test System Development for Breast Cancer Research”, CC Yang, KJL Burg, Transactions of the 2009 Annual Meeting and Exposition of the Society for Biomaterials, San Antonio, TX, 2009.

“Tamoxifen Loaded Beads for Concurrent Breast Cancer Therapy and Tissue Engineering”, CT Gomillion, F Xu, KJL Burg, Transactions of the 2009 Annual Meeting and Exposition of the Society for Biomaterials, San Antonio, TX, 2009.

“Conditioned Media Enhance the Osteogenic and Chondrogenic Differentiation of Mesenchymal Stem Cells”, SA Maxson, KJL Burg, Transactions of the 2009 Annual Meeting and Exposition of the Society for Biomaterials, San Antonio, TX, 2009.

“Observations on Inkjet Cartridge Parameters for Biomaterial Deposition”, C Parzel, T Burg, R Groff, M Pepper, T Boland, KJL Burg, Transactions of the 2009 Annual Meeting and Exposition of the Society for Biomaterials, San Antonio, TX, 2009.